All Products
One page per series. Every listing carries the ordering codes, the specification table, application scenarios and the model variants that share the series platform.
- Safety Light Curtains7
- Safety Relay Modules4
- Safety Door Locks & Interlocks7
- Measuring & Vehicle Separation Light Curtains2
- Photoelectric Sensors11
- Laser Sensors4
- Proximity Sensors11
- Fiber Optic Sensors8
- Laser Displacement & Profile10
- Color Sensors4
- Ultrasonic Sensors4
- Encoders & Draw-Wire4
- Pressure Sensors1
- Magnetic Sensors2
- Smart Code Readers4
Safety Light Curtains7
Through-beam safety light curtains from 70 mm to 2994 mm protective height, with 4 to 292 beams and ≤10 ms response.
LE- Series Safety Light Curtain for Press Machines
A 220 VAC light curtain built for press and press-brake guarding: relay output with NO + NC contacts, line synchronization and a ≤10 ms response, supplied as
View product page →
LE-P Series Safety Light Curtain (Side Slim Type)
A 10 × 22 mm side-slim light curtain for machine edges and narrow side entries. Detection distances 0.01–3 m or 0.01–6 m, 4–292 beams, protective height 70–2
View product page →
LE-H Series Safety Light Curtain (No Blind Zone Type)
A 28 × 28 mm no-blind-zone light curtain: the first beam sits at the very end of the profile, so the guard reaches the machine surface with no unprotected ga
View product page →
LE-F Series Safety Light Curtain (Front Slim Type)
A 25 × 12 mm front-slim light curtain for small machines and electronics assembly equipment. Detection distances of 0.01–3 m or 0.01–6 m, protective heights
View product page →
LE-E Series Safety Light Curtain (Slim Profile)
A slim-profile 32 × 20 mm light curtain for machine frames where mounting space is scarce. Standard protective heights run from 70 mm to 2992 mm with 4–292 b
View product page →
LE-C Series Safety Light Curtain (Long Range)
The long-range version of the LE Raun light curtain: a 35 × 40 mm housing with detection distances up to 20 m on request, for large openings, transfer lines
View product page →
LE-B Series Safety Light Curtain
A general-purpose through-beam safety light curtain in a 30 × 30 mm profile. With 4–292 beams and protective heights from 70 mm to 2994 mm, the LE-B is the w
View product page →Safety Relay Modules4
Category 4 / SIL 3 safety relay modules for light curtain input, emergency stop and two-hand control.
LE-S3014 Safety Relay Module (Emergency Stop)
An emergency-stop safety relay module with dual-channel monitoring, category 4 to EN ISO 13849-1 and safety level 3 to IEC 61508 / IEC 62061. 24 V DC, ≤2 W,
View product page →
LE-S3013 Safety Relay Module (Two-Hand Start)
A two-hand start safety relay for press and machine-tool control: both hand controls must be actuated within the synchronous window before the output closes.
View product page →
LE-S3012P Safety Relay Module (Auto Start)
The auto-start version of the LE-S3012 safety relay: category 4 to EN ISO 13849-1, safety level 3 to IEC 61508 / IEC 62061, 24 V DC, ≤2 W, IP40 (terminals IP
View product page →
LE-S3012N Safety Relay Module (Manual Start)
A dual-channel safety relay module for light curtain input, category 4 to EN ISO 13849-1 and safety level 3 to IEC 61508 / IEC 62061. Manual start version, 2
View product page →Safety Door Locks & Interlocks7
Mechanical, electromagnetic and RFID-coded guard door interlocks with up to 2000 N holding force.
QSD-AQMS-K4-L2 Safety Door Latch
A lever-action safety door latch that holds a guard door closed and provides the mounting point for an interlock actuator on retrofits and fabricated guards.
View product page →QSDP Mechanical Safety Interlock Switch
A mechanical two-contact interlock for guard doors that need a simple, hard-wired safety contact. Flame-retardant Pa66 housing, copper contacts, IP67 sealing
View product page →QSD-K6 & SDP Electromagnetic Safety Interlock Series
Electromagnetic interlocks with 2, 4 or 6 contacts and a 1300 N locked-state tensile strength — for machine tools that need more contacts than a basic interl
View product page →QSD-M3 Non-Contact RFID Safety Switch
A coded, non-contact interlock with no mechanical actuator to align: 0–10 mm horizontal and 0–8 mm vertical operating distance, dual-channel NPN/PNP output,
View product page →QSD-M01 Non-Contact Magnetic Coding Safety Switch
A magnetic-coded interlock with two safety output contacts and a wide 8 mm operating / 17 mm release window — a low-cost coded alternative where a mechanical
View product page →QSD High-Performance Safety Interlock Switch
An electromagnetic / mechanical locking interlock with ≥2000 N holding force, ≤2 mm bolt insertion tolerance and 1,000,000 operating cycles — for heavy guard
View product page →DE-K Series Actuation Keys
Six actuator key shapes for the QSD / QSDP interlock range — T-shaped, L-shaped, long-throw and adjustable versions, so the key can follow the door's closing
View product page →Measuring & Vehicle Separation Light Curtains2
High-resolution optical arrays for dimensional measurement and vehicle separation on toll and weigh-in-motion gantries.
LC Series Vehicle Separation Light Curtain
A weather-rated separation light curtain for toll lanes and weigh-in-motion gantries: 4–292 beams, 200–2500 mm height, 0.5–15 m sensing distance and NEMA 3R
View product page →LC Series Measuring Light Curtain
A measuring light curtain with 2 mm minimum accuracy and up to 500 beams, converting the interrupted beam count into a dimension, an edge position or a count
View product page →Photoelectric Sensors11
Slot, label, square, background-suppression, ultra-thin and ultra-compact photoelectric sensors — diffuse, retro-reflective and through-beam.
Slot-Type Photoelectric Sensor (EU-25 / 45 / 65 / SX67 / 67A)
A fork-shaped photoelectric sensor in five housing families and 24 variants: 5 mm slot (6 mm on EU-65), 0.03 mm repeat accuracy and 2 kHz response for label
View product page →
LUE-13 Ultra-Thin Photoelectric Sensor
A 13 mm-wide sensor for mounting in narrow frames: 2–25 mm diffuse, 300 mm and 1,000 mm through-beam in front- and side-sensing versions, IP66 and under 1 ms
View product page →
LMX Ultra-Compact Photoelectric Sensor
A metal-bodied 25 mm sensor with a red and green indicator: 80 mm diffuse, 500 mm and 2,000 mm through-beam, ≤1 ms response, IP65.
View product page →
LMG2 Ultra-Compact Photoelectric Sensor
A 20 mm-class sensor with a 1 ms response: background-suppressed diffuse at 30 and 120 mm, retro-reflective at 2.5 m and through-beam at 2.5 m, all IP65.
View product page →
LMC12 Miniature Snap-In Photoelectric Sensor
A 12 mm snap-in through-beam pair for 5 m and 8 m spans — NPN or PNP, 5 ms, IP65, with a 3.4 mm cable for panel and door-edge mounting.
View product page →
LM18 Cylindrical Photoelectric Sensor
An M18 barrel sensor with 100 mm and 300 mm diffuse versions and 5, 10 and 15 m through-beam versions — IP67, 5 ms, NPN or PNP.
View product page →
LFH-S Digital-Display Photoelectric Sensor
A diffuse sensor with a four-digit display for setup and run-time monitoring: 1,000 mm spot or 500 mm line spot, 50 µs response and IP66.
View product page →
LFN-CX44 Background Suppression Photoelectric Sensor
A background-suppression sensor with three spot geometries — small, large and strip (bar-shaped) — so a 100/200/300 mm window can be set to ignore whatever s
View product page →
LFD61 Square Photoelectric Sensor Series
A 10-model square sensor family with one housing: retro-reflective to 3 m, diffuse to 300 mm, transparent-object detection, and through-beam to 10 m — all IP
View product page →
EU2100 Photoelectric Label Sensor
A 2 mm fork sensor in an aluminium housing for opaque label detection, gap detection and presence/absence checking at 2 kHz — NPN or PNP, with NO + NC output
View product page →
EU1000 Capacitive Label Sensor
A 0.7 mm capacitive fork that detects transparent as well as opaque labels, switching at 5 kHz with NPN NO/NC + PNP NO/NC output in an aluminium housing.
View product page →Laser Sensors4
Triangulation and time-of-flight laser sensors: a 3 mm spot from 10 mm to 300 mm, and TOF ranges from 30 mm up to 20 m.
LTOF-R300N(P) Time-of-Flight Laser Sensor
A 3 m time-of-flight sensor in an IP67 square body: ±40 mm absolute accuracy, 1 ms response, distance read from the light's flight time rather than its inten
View product page →
LTOF Long-Range Time-of-Flight Laser Sensors
TOF laser sensors from 0.05 m to 20 m with NPN/PNP, 4–20 mA and optional RS485 output — for cranes, stacker cranes, vehicles and large workpieces.
View product page →
LQD61 Laser Sensor Series (Through-Beam, BGS, One-Touch)
A 3 mm laser spot across 10 mm to 30 m: through-beam laser pairs, background-suppressed triangulation from 10 mm to 1 m, and a one-touch variant that learns
View product page →
Cylindrical & Right-Angle Laser Sensors (LQD / LQZ / LQT)
Cylindrical and right-angle laser sensors: 2–3 mm spot, diffuse 30–300 mm, through-beam to 50 m, 10–30 V DC, 5 ms, IP65. LQD / LQZ / LQT series.
View product page →Proximity Sensors11
Inductive sensors from a φ3 mm barrel to an M30 40 mm long-range body, plus capacitive, ring, flat-pack and square types.
Ultra-Thin Flat Inductive Proximity Sensors (5 – 10 mm thick)
A 5 mm thick slab with the sensing face on the flat: bolts to a gripper finger, a conveyor edge or the inside of a channel where no barrel fits.
View product page →
Ultra-Short Inductive Proximity Sensors (15 – 28 mm body)
A 15 mm long barrel where a standard 45 mm body has nowhere to go — measured from the face, not from the thread.
View product page →
Ultra-Compact Inductive Proximity Sensors (φ3 to M6)
Barrels from φ3 mm up, for the places where nothing else fits: inside a small fixture, beside a gripper jaw, or under a 10 mm strip of sheet metal.
View product page →
Standard Inductive Proximity Sensors, Short Barrel (M6.5 – M30)
The short-body standard: M6.5 to M30 with a 35 – 58 mm barrel, sensing 1 mm to 15 mm, in cable or M5-connector versions.
View product page →
Square-Type Inductive Proximity Sensors (5 × 5 to 17 × 17 mm)
A block instead of a barrel, with the sensing face on the front or on the top — the shape that fits against a flat plate, inside a channel, or under a moving
View product page →
Loop-Shaped (Ring) Inductive Proximity Sensors (6 – 21 mm bore)
A coil around a hole: anything metal that passes through is counted, down to a 0.4 mm wire, regardless of where in the bore it passes.
View product page →
Long-Range Inductive Proximity Sensors (2 – 40 mm)
Two to four times the sensing distance of a standard body in the same diameter: 40 mm from an M30, 20 mm from an M18, 10 mm from an M12.
View product page →
High-Temperature Inductive Proximity Sensors (M8 – M30, PTFE face)
A PTFE sensing face and a heat-tolerant coil for positions next to a hot platen, a pre-heater or a dryer hood, where a standard PBT face softens and drifts.
View product page →
Standard Inductive Proximity Sensors with Dual-Colour Indicator (M8 – M30)
The general-purpose block: eight body sizes from M8 to M30, sensing 1 mm to 25 mm, with a red / green status LED you can read from across the cell.
View product page →
DC 2-Wire Inductive Proximity Sensors (M8 – M30)
Two wires in series with the load — no separate supply wire, and any number of them can be connected in series into one PLC input.
View product page →
Capacitive Proximity Sensors (M8 – M30, 1 – 30 mm)
Detects what an inductive sensor cannot: plastic, glass, wood, grain, water and powder, up to 30 mm from an M30 body.
View product page →Fiber Optic Sensors8
Two amplifier bodies and four families of fiber units: 30 mm wide dual-display amplifier, through-beam pairs, and stainless units.
LG Series Fiber Amplifier with Chinese Display
The same fiber port and the same 80 mm body as the LE series, but with a Chinese-language menu and a setting sequence that a line operator can follow without
View product page →
LE-XZ3910 Positioning-Pin Fiber Sensor
A machined aluminium head with a cross-shaped aperture and four fiber bundles, used as a positioning pin: the part is pushed onto the pin and the four beams
View product page →
LE Series Dual-Display Fiber Amplifier
One 33.9 × 11.2 × 75 mm body with two four-digit displays — threshold on top, measured value below — and a response time that is a parameter rather than a
View product page →
Through-Beam Fiber Optic Units
Twelve emitter-receiver pairs from a 1 mm whisker to a 1 m gap: the smallest core is Ø0.25 mm for a wire or a 0.4 mm contact, the largest reaches 1 m between
View product page →
Special Fiber Units and Focusing Lenses
The units that exist because a standard one does not fit: a side-view head, a flat head that slips under a wafer, a 16-core bundle for a wide line, and screw
View product page →
Laser Fiber-Optic Amplifier (LG-LV61N(P) / LG-LVT61N(P))
Laser fiber-optic amplifiers LG-LV61N(P) and LG-LVT61N(P): 0.25 µs response selector, 1–9999 ms delay, area detection with auto sensitivity tracking, NPN/PNP, 12–24 V DC.
View product page →
High-Temperature Fiber Optic Units
Three temperature classes in the same body family: 105 °C for a drying tunnel, 200 °C for a solder reflow exit, 350 °C for a weld seam or a furnace mouth — w
View product page →
Diffuse Fiber Optic Units
Thirteen diffuse units in one table: plain Ø1.5, 2, 3 and 5 mm tips for a drilled hole, M3 threaded bodies with a replaceable Ø0.9 or Ø1.5 mm tip, side-view
View product page →Laser Displacement & Profile10
Seven series from a 50 mm triangulation spot with 1 μm repeatability to a 1.1 m line-scan head that captures 8000 points per profile.
Through-Beam Edge Measurement Sensor (MU-DM2)
A 660 nm laser through-beam pair that reports edge position across a 5 mm window or strip width across a 10 mm window, with 0.25 µm repeat and a 200 µs sampl
View product page →
Laser Distance Sensor (LE-TLS-01C)
A 658 nm time-of-flight distance sensor with NPN/PNP switching, analog voltage and current outputs and RS485 on the same M12 connector — 1.5 mm + 0.5 % accur
View product page →
Laser Radar Sensor (LE-ILS-F31-C)
A 270° scanning LiDAR with a 25 m range and 15 Hz scan rate, packaged in a 60 × 60 × 85 mm body for AGVs, mobile robots and fixed-area monitoring.
View product page →
Laser Displacement Sensors (LE-G Series)
Four triangulation heads from 30–50 mm short range to 30–400 mm wide range, with ±1.5 µm repeat accuracy and NPN, PNP, RS485 or SSI output in the same 12–24 V
View product page →
3D Line-Scan Laser Profile Measuring Instruments (LE-8000 Series)
Eleven profile heads and a separate controller: 4096 points per profile, 49 kHz sampling, encoder input and trigger synchronisation for multi-head installati
View product page →
3D Line-Scan Laser Profile Measuring Instruments (LE-7000 Series)
Ten profile heads on one platform, from a 38 mm close-range unit to a 1144 mm wide-area scanner, with the same 3200-point profile and 9 µs sampling across th
View product page →
3D Line-Scan Laser Profile Measuring Instruments (LE-6000 Series)
A compact 3D profile head for close-range inspection: 8000 points per profile at 49 kHz, native single-frame HDR, and 1 µm profile intervals on the 20 mm mod
View product page →
Miniature CMOS Laser Displacement Sensor (LE-0x0-A + CD33)
Miniature CMOS laser displacement sensors LE-030-A to LE-800-A(485) and CD33 amplifier heads: ±5 to ±500 mm range, 0.25 µm repeat, analog/RS485 + switch output, Class 2, 655 nm.
View product page →
LE-9000 Series 3D Line-Scan Laser Profile Measuring Instrument
LE-9000 series 3D line-scan laser profile measuring instruments LE-9020 / LE-9060 / LE-9080: 8000-point profiles, 90 kHz sampling, ±0.15 µm repeat, HDR, IP67.
View product page →
Laser Displacement Sensor, Chinese Version (LE-030-N / LE-050-N / LE-100-N / LE-200-N)
Chinese-version laser displacement sensors LE-030-N to LE-200-N: switch + analog output, 30/100/200 mm centre distance, ±5–±80 mm range, 10–200 µm repeat, Class 2, 655 nm.
View product page →Color Sensors4
Four families for print-registration marks and colour verification: 0.1 ms response, 0.5 × 5 mm spots, long-range 100 mm heads.
Digital-Display Color Sensor (EM-S11N Series)
A colour sensor with an OLED display, an RGB three-colour LED and a 1–9999 ms timer, for setup without a laptop and verification wi
View product page →
Long-Range Color Sensor (EM-D70 / EM-D150 / EM-D500 Series)
A white-LED colour sensor that covers 30 mm to 1500 mm on the web, in single-spot and dual-spot versions, with a 200 µs response and an optional RS-485 output.
View product page →
High-Precision Digital Color Sensor (EM-C21N/P)
An RGB three-colour digital sensor with four output channels and a 200 µs response, paired with long-spot or short-spot sensing heads for 1 mm to 3 mm minimu
View product page →
Color-Mark Sensors (MARK / EM-S11N Series)
Two registration-mark sensors for packaging and printing: the single-output MARK with a 2 × 5 mm spot at 5–20 mm, and the two-output EM-S11N(P) that switch
View product page →Ultrasonic Sensors4
M12 to M30 barrels and plastic-cube bodies, 20 mm to 6 m sensing ranges, in switching, analog, RS485 and IO-Link versions.
Ultrasonic Single/Double-Sheet Detectors (LDA18 / LDA30)
Detects two sheets fed where one should be: paper from 0.01 mm, metal sheet up to 3 mm, with green / yellow / red LEDs for single sheet, air and double sheet
View product page →
Long-Range M18 Ultrasonic Sensors (LB300 / LB500 / LB1000)
Three M18 barrels covering 300 mm, 500 mm and 1 m, in straight and 90° elbow bodies, with switching, analog, RS485 and IO-Link outputs on the same platform.
View product page →
M30 Long-Range Ultrasonic Sensors (LB2000 / LB4000 / LB6000)
Three M30 bodies with 2 m, 4 m and 6 m ranges for level and object detection where the target is far, dark, transparent or dusty.
View product page →
Short-Range Metal-Barrel Ultrasonic Sensors (LB120 / LB200)
An M12 barrel that reaches 120 mm and an M18 barrel that reaches 200 mm, in switching, current, voltage, RS485 and IO-Link versions, with a 20 mm blind zone
View product page →Encoders & Draw-Wire4
Absolute and incremental rotary encoders from φ25 to φ58 mm, draw-wire sensors from 0.5 m to 15 m of travel.
Incremental Rotary Encoders (LE25 / LE38 / LE50 / LE58)
From 50 to 4096 pulses per revolution, A/B/Z with a six-phase differential option, 200 kHz output frequency and 6000 rpm — in solid-shaft, clamp-hollow and b
View product page →
Handwheel Encoders and Manual Pulse Generators (LE60 / LE80 / LERS T1469)
A graduated handwheel with a built-in encoder and a hand-held pendant, both at 25 or 100 pulses per revolution, for manual positioning on a machine that read
View product page →
Draw-Wire Displacement Sensors (LE27 / LE38 / LE50 / LE40 / LE78 / LE115)
A stainless cable on a spring-loaded drum turns linear travel into an encoder reading — 500 mm to 15 m, at up to 1 m/s, with Modbus, CANopen, SSI, analog or
View product page →
Absolute Rotary Encoders (LE25 / LE27 / LE38 / LE50 / LE58)
Seven bodies from Φ25 to Φ58 mm, 10 to 17 bit single-turn resolution and up to 21600 turns of backup, with Modbus RTU, CANopen, SSI, BiSS-C, SPI and analog o
View product page →Pressure Sensors1
High-precision digital pressure gauges from −101.3 kPa to 1,000 MPa, ±1 % F.S., 2 ms response.
Magnetic Sensors2
Fifteen non-contact and six reed-type switches for pneumatic cylinder grooves: 40-800 Gauss, up to 1000 Hz.
D-Series Electronic Magnetic Switches (D-A93 / D-Z73 / D-C73 / D-M9 / D-F8 / DMS)
Fifteen non-contact magnetic switches for pneumatic cylinder grooves: 40–800 Gauss sensitivity, 2.5–100 mA switching, 1000 Hz and a red LED that shows the sw
View product page →
C-Series Spring-Type Magnetic Switches (CMSJ / CMSG / CMSE / CS1 / 3045)
Reed-type magnetic switches for cylinders and actuators: 60–800 Gauss, 10–240 V AC/DC, 100 mA and 10 W, in a body that fits the same grooves as the electroni
View product page →Smart Code Readers4
Four camera-based readers from 1 MP to 20 MP, 8 mm to 25 mm focal length, with fixed, liquid and C-mount focus options.
LE800P Series Smart Code Reader
1 MP (1280 × 800) at 6 or 12 mm in an IP67 body, with a manual focus ring on three part numbers and a liquid lens on the rest, all on the same 24 V DC / 15 W
View product page →
LE600P Series Smart Code Reader
A fixed-focal 1 MP sensor at 1280 × 800 that runs at 60 fps from 24 V DC or USB 5 V and draws 5 W, in an IP54 body small enough to fit inside a machine frame
View product page →
LE2000P Series Smart Code Reader
5 MP (2448 × 2048) on a 1/1.8" target, in focal lengths from 8 to 25 mm, with a mechanical focus ring on four bodies, a liquid-focus version, and two C-mount
View product page →
LE1000P Series Smart Code Reader
Three focal lengths — 8, 12 and 16 mm — in one 24 V body, at either 1 MP (1280 × 800) or 2.3 MP (1920 × 1200), with a global shutter, 3 µm pixels and an IP67
View product page →