Weld seam inspection
8000 points per profile resolve the fillet geometry of a seam for inline go / no-go judgement.
Laser Displacement · 3D line-scan profile, 8000 points
LE-9000 Series 3D Line-Scan Laser Profile Measuring Instrument
LE-9000 series 3D line-scan laser profile measuring instruments LE-9020 / LE-9060 / LE-9080: 8000-point profiles, 90 kHz sampling, ±0.15 µm repeat, HDR, IP67.
Model LE-9020 / LE-9060 / LE-9080 · Brand LE Raun · Category: Laser Displacement & Profile
Profiles8000 points
Repeat accuracy±0.15 µm
Sampling11.1 µs (90 kHz)
ProtectionIP67 (IEC60529)
Overview
The LE-9000 series is the high-resolution end of the 3D line-scan profile family: 8000-point profiles streamed at a 90 kHz sampling speed (11.1 µs per profile), with repeat accuracy from ±0.15 µm on the Z axis. Three reference distances — 20, 60 and 80 mm — let the same instrument family serve tight fillet welds and wide gap checks without changing platforms.Capture runs in 2D + 3D mode with native single-frame HDR and multi-frame HDR synthesis, so shiny and multi-material surfaces keep a usable profile where a single-exposure scanner drops out. The housing is IP67 (IEC60529), the temperature characteristic is 0.006% of F.S. per °C, and the laser runs a two-mode safety scheme: 2M class in safety mode and 3B class in performance mode, on Blue LD / Red LD sources.
Application scenarios
Component coplanarity
Z repeat to ±0.15 µm checks lead coplanarity and connector pin height on dense boards.
Gap and flush measurement
Door gaps and panel flush read directly from the profile at line rate.
Shiny and multi-material surfaces
Native single-frame HDR plus multi-frame synthesis holds the profile across reflective and dark zones.
High-speed production
90 kHz profile sampling keeps up with fast lines without motion blur between points.
Industries
- Automotive
- Electronics
- Metal fabrication
- Precision assembly
Technical specifications
| Model | LE-9020 / LE-9060 / LE-9080 |
|---|---|
| Reference distance | 20 mm [LE-9020] · 60 mm [LE-9060] · 80 mm [LE-9080] |
| Repeat accuracy | Z-axis: 0.15 µm , X-axis: 0.15 µm [LE-9020] · Z-axis: 0.2 µm , X-axis: 0.25 µm [LE-9060] · Z-axis: 0.25 µm , X-axis: 0.4 µm [LE-9080] |
| Linear accuracy | Z-axis: ±0.03% of F.S, 0.72 µm (±0.006%) [LE-9020] · Z-axis: ±0.02% of F.S, 1.68 µm (±0.004%) [LE-9060] · Z-axis: ±0.02% of F.S, 5.4 µm (±0.004%) [LE-9080] |
| Profile interval | 1 µm (1–1.5 µm) [LE-9020] · 2.5 µm (2–3 µm) [LE-9060] · 5 µm (4–6 µm) [LE-9080] |
| Profile data quantity | 8000 |
| Sampling speed | Ultra-high-speed mode: 11.1 µs (90 kHz) |
| HDR high dynamic range | Supports native single-frame HDR; supports multi-frame HDR synthesis |
| Temperature characteristics | 0.006% of F.S. / °C |
| Laser class | Safety mode: 2M class laser product · Performance mode: 3B class laser product |
| Light source | Blue LD / Red LD |
| Capture mode | 2D mode + 3D mode |
| Protection level | IP67 (IEC60529) |
Dimensions
| Item | Value |
|---|---|
| Mounting | Rigid bracket at the selected reference distance (20 / 60 / 80 mm); keep the line perpendicular to the travel |
| Note | Mechanical dimensions are not printed individually in the 2026–2027 catalogue |
Wiring & output
| Lead | Colour |
|---|
How to specify
- 01
Choose the reference distance
20 mm (LE-9020) for the finest features and tightest repeat; 60 / 80 mm (LE-9060 / LE-9080) when the fixture needs the stand-off.
- 02
Budget the profile interval
1 µm (1–1.5 µm), 2.5 µm (2–3 µm) or 5 µm (4–6 µm) — the interval sets the smallest feature the profile can carry.
- 03
Decide the laser mode
Safety mode runs 2M class for open areas; performance mode runs 3B class for protected cells needing the full optical budget.
- 04
Plan for HDR surfaces
Shiny or mixed-material targets need native single-frame HDR or multi-frame synthesis — verify on the worst surface, not the nominal one.
Why this series
8000 points at 90 kHz
Profiles arrive every 11.1 µs with 8000 points — fine features at production speed.
Repeat from ±0.15 µm
The LE-9020 holds Z-axis repeat to ±0.15 µm for coplanarity and seam work.
HDR on the hardest surfaces
Native single-frame HDR and multi-frame synthesis keep shiny targets in profile.
Questions
What is the difference between safety mode and performance mode?
In safety mode the instrument is a 2M class laser product — suitable for open areas with blink-reflex protection. Performance mode runs a 3B class laser with the full optical budget for protected cells.
How do the three models differ?
Only in reference distance and resolution: 20 mm / ±0.15 µm / 1 µm interval (LE-9020), 60 mm / ±0.2 µm / 2.5 µm (LE-9060), 80 mm / ±0.25 µm / 5 µm (LE-9080). Profile count, sampling speed, HDR and IP67 are common.
Can it capture 2D intensity images too?
Yes — capture mode is 2D + 3D, so the same head returns an intensity image alongside the height profile.
Need a quotation for LE-9000 Series?
Send your application details or the guard opening dimensions and we will specify the right model and configuration for your machine.